Standard B

The Arasaka Standard B is Arasaka’s normal line model, a mid-range off-the-shelf PA suit built on the Ronin chassis. (CP3191 p.89, p.90)

Key facts

  • Specification sheet (see tables below): Punch 4D10, Crush 5D10, Kick 6D10; total weight 691kg, SIB/DFB +1/+2, Ronin STR 37 chassis (185kg, cap/carry 1850/555kg), total cost 89,050eb, trooper size 114kg, Toughness Mod -9. (CP3191 p.89)
  • Armor SP 50 in every body area; SDP head 10, each arm 10, each leg 19, torso 26. (CP3191 p.89)
  • The comparison box on p.81 prints different figures for the same suit: cost 88,550eb, weight 661kg, SP 50, SDP 10 arm / 19 leg / 28 torso, STR/BOD 37, REF special (the wearer’s), MA special +3, Punch 4D10, Kick 6D10. (CP3191 p.81)
  • Loadout: ECI Wideband HUD, EMP sponge, thermal targeting and long-range radio in the head; Tsunami 25mm grenade launcher with reloads; BSS Silicon Spray and BPL Plastic Obstacle packs; Auto-Fletchette Pistol with reloads; 12.7mm reloads; Monitor auto-doc, EMP sponge, escape hatch; BRP packs. (CP3191 p.89)
  • Design notes: not a great suit against other Powered Armor but sufficient against civilians (a concept Arasaka tests quite a bit); the unit edgerunners will see in low-intensity combat and the one most likely to squash them flat during a mission. (CP3191 p.90)
  • It has definite weaknesses such as armor that a LAW could pop, but most nudies will not get the chance to exploit them unless they come prepared. (CP3191 p.90)

Specification sheet

FieldValue
ManufacturerArasaka
Total weight691 kg
SIB/DFB+1/+2
ChassisRonin, STR 37
Chassis weight185
Chassis cap./carry1850/555 kg
Total cost89,050 eb
Trooper size114 kg
Toughness Mod.-9
Punch4D10
Kick6D10
Crush5D10
Run / Leap / Jumpblank on the sheet
Notes boxempty
Equipment carried12.7mm Hvy MG, 25/30/43 (SP/SDP/WT)

(CP3191 p.89)

LocationSPSDPInternal systems (SDP)External systems (SP/SDP)
Head [1]5010ECI Wideband HUD (10); EMP sponge (30); Thermal targeting (5); Long-range radio (5)-
R. arm [2]5010Tsunami 25mm grenade launcher (25); 25mm GL reload (20) (10) x2-
L. arm [3]5010BSS Silicon Spray (10) x2; Auto-Fletchette pistol (15); Fletch reload (100) (10) x3-
R. leg [4-5]501912.7mm reload (100) (20) x3-
L. leg [6-7]5019BPL Plastic Obstacle (10) x2-
Torso [8-0]5026Monitor auto-doc (15); EMP sponge (30); Escape hatch (30); BRP Fletch pack (front) (20); BRP Fletch pack (rear) (20)-

(CP3191 p.89)

Relations

Contradictions / notes

  • The comparison on p.81 gives the Standard B at cost 88,550eb, weight 661kg and torso SDP 28, while the specification sheet gives 89,050eb, 691kg and torso SDP 26; both recorded as printed. (CP3191 p.81, p.89)
  • The sheet’s Run, Leap and Jump boxes are blank in print. (CP3191 p.89)
  • Stats checked against the page image (CP3191 p.81, p.89).

Sources

  • CP3191: Cyberpunk 2020 - Maximum Metal (1993), PDF p. 81, 89-90